Magic Mushroom Shimmer Grow Tent - Shiny Spores (2024)

We are happy to announce the Magic Mushroom Shimmer Grow Tent!

If you are looking for the best possible setup, a professional setup, a setup that will get you results then look no further! The Magic Mushroom shimmer grow tent will enable you to reap the bountiful andfruitfulresults of your labor.

What You Will Receive

1. 1x Mylar Tent 1m2 around the base and 2m tall.

2. 2x 4 tier Chrome Metal Shelves. 90cm x 45cm x 135cm high. 8 shelves total and floor space.

3. 2x 120watt bar heaters. Plug and Play.

4. 1x 1000Watt Digital Thermostat. Plug and Play.

5. 1x 2m 4 Socket Extension Lead. 13amp.

6. 6″ Circulation Fan. Clip on.

7. 30cm White Led Light.

Optional extras for this kit include:

1. 20x4lbs “Fully Automatic LightBags” 2 Per shelf.

This kit includes 20 x 4lbs LightBags. LightBags were invented right here in the United Kingdom. Containing a perfect mixture of Moist Sterilized Rye Grain, Coco Coir, Vermiculite and Perlite.

Fully automatic Mushroom Growing bags.

No daily Maintenance.

Normal time to first harvest 35-45 days.

Using LightBags in Tents is super easy and Guaranteed to bring smiles.

Average expected dry weight: 1.2 – 2.0

2. 16x 25L MonoTub Kits, 2 Per shelf.

Designed in house by the Elves.

1. This kit includes 16x 25L MonoTubs with 4 HEAT Formed Holes in each tub (No sharp edges).

2. Supplied with Polyfill wads to fill holes for air filtration.

3. To compliment each MonoTub. We have included 1kg Rye Bag + 1KG bags of Cvg Bulk Substrate.

4. Black liners. DIY cut down to size.

5. 2x MycoMedi Glove Packs.

Average expected dry weight: 0.8 – 1.6

3. 8x 45L MonoTub Kits, 2 Per shelf.

Designed in house by the Elves.

1. This kit includes 8x 45L MonoTubs with 6 HEAT Formed Holes in each tub (No sharp edges).

2. Supplied with Polyfill wads to fill holes for air filtration.

3. To compliment each MonoTub. We have included 1.5kg Rye Grain bag + 3x1KG bags of Cvg Bulk Substrate.

4. Black liners. DIY cut down to size.

5. 2x MycoMedi Glove Packs.

Average expected dry weight: 1.6 – 2.4

MonoTubs are the most productive method of producing lots and lots and Lots of mushrooms. MonoTubs do require a small amount of daily maintenance and do carry a much higher risk of contamination but our products, we know you will do just great. We have also added enough Golden Vermiculite Casing to help new starters with that amazing pinset, tub after tub.

How To Use your MonoTub

Inject and colonize your Grain Shaker Pot or Rye Grain Bag@24- 27c. This should take 2 weeks. Bake, Mix and Check.

Cut the Black liners to size and place the liner into the provided MonoTubs

Then use the resulting Grain Spawn from the colonized Grain Shaker Pots or bags to layer in with the included Cvg bulk mix. This makes a spawn and bulk substrate lasagna. Yummy.

Use one MycoMedi packs for layering the spawn and substrate and one for your first harvest.

Always start with a thin layer of bulk substrate as the first layer.

Always end with a thin layer of bulk substrate as the last casing layer.

Keep the grain layers centrally placed and at least 4cm away from the side edges where the substrate lasagna meets the sides of the MonoTub.

Add a sprinkling of Golden Vermiculite over the final surface if you are new to MonoTubbing this will help your pins form.

Add the wads of Polyfill to the MonoTub holes.

Trim down the black liner so the Polyfil Wads are clear.

Lightly Spray down the surface vermiculite or bare coco coir casing and clip on the MonoTub lid.

Place into the Shimmering Wonder Tent.

Set the thermostat to 27c

Set the light timer to 12hrs on and 12hrs off.

Make sure the 6″ clip on fan is positioned so as to move the hot heater air up the center of tent. This will evenly distribute the heating to all MonoTubs.

From the first day.

Open the lid and spray mist into the tub. 3 good sprays if using vermiculite casing. 5 good sprays if just coco casing.

Repeat once a day AND once a Night. The spray will evaporate during the day and night periods while your away. Increase the misting frequency to 3 or 4 times a day if moisture is not building up inside the MonoTub.

Add fanning cycles if your Misting starts to form pools of water.

Keep going until you see small white dots form on the surface of the substrate or 20 days have passed.

If 20 days have passed and no pins have shown please contact the TEAM.

After the small dots have formed

The boxes are designed to breath easily in the tent environment.

Make sure to mist the small white dots well but not so much as to make pools of water.

After pins have formed

Yes you need to mist but you need to also let the pins breath.

So at this point please make sure not to spray the pins directly. Please mist into the MonoTub so the mist falls down over the pin heads.

Just the right amount of mist will last just up till the evening misting.

Cracked pin heads need more mist.

Dark pin heads had too much mist and may recover with extra fanning.

Any ways Standard MonoTub care is perfect.

When setting up Your Shimmering Wonder Tent.

Make sure to place the shelve pairs at equal high. This way when the shelves are placed front and back rather than side by side. You will be able to slide all items onto all shelves.

Place the 2x heater bars in between the shelves and clip the air fan on the lowest shelf. Direct the fan to blow up the hot air up between the middle of the two shelves just like in the picture. This is the best way to circulate the warm air and maintain the best even temperature at all shelf levels.

Place the temperature probe of the thermostat on the inside edge of the third shelf up from the floor. This will measure the warmest flow of air and give the most even results.

Support the light with the included tent ceiling bars. The pictures show the light shining down BUT. Turning the light around so the light shines up against the tent ceiling and then reflects down will give great results. Too bright of a light will mean small mushroom fruits. Reflected light should give a mushroom height of around 5-7″.

Set the thermostat to run at 27c.

All the rest is plug and play really.

Don’t Miss Out!

Why not give Shiny Spores a follow!

Instagram

Facebook

TikTok

Disclaimer

Please note that it is illegal to grow magic mushrooms within the UK. We ask that you do not use these spores to grow mushrooms, but instead use them to study under a microscope. We cannot be held liable for any illegal use of these spores. Please check your local regulations as we cannot be responsible for the laws you should follow in your own country.

Contact Us

Please don’t hesitate to contact us if you have any questions or concerns regarding your order! You can call, email, or message us between Monday to Friday, 9-5 (excluding bank holidays).

Magic Mushroom Shimmer Grow Tent - Shiny Spores (2024)

FAQs

How do you use a shiny spores grow bag? ›

Easy and simple to use. Simply inoculate your bag, give it a mix and lie it on its side in a nice, warm place. Keep it in the dark for 2-3 weeks until it's fully cultivated and then move it into low light conditions when it's ready to fruit.

How long does mycelium take to grow from spores? ›

Colonization occurs after inoculation. This is when the mycelium will start to take over the grain that was inoculated with spores. This period usually lasts between 3 to 6 weeks depending on strain and environmental conditions. Ideal conditions for this phase are in a dark place and temperature between 72 F – 80 F.

Should I break up mycelium in a grow bag? ›

When the mycelium has grown three to four inches, without opening the bag, carefully break up the colonized substrate and mix it into the uncolonized substrate. This will dramatically speed up the colonization process.

How do you inject spores into a mushroom bag? ›

Push the needle about 1/2 inch into the bag and inject spores. Pull the needle half way out and angle it in a different direction and inject another 1-2 cc's of spores We recommend a total of 4-5 cc's of spores per bag. Depending on how easily/ affordably you can access spores - the more you use, the faster it grows!

Why is my mycelium not growing from spores? ›

Temperature Fluctuations:

Each mushroom strain has an ideal temperature range for growth. If the ambient temperature veers too far from this sweet spot, colonization can slow down or even halt.

What makes mycelium grow faster? ›

The higher the inoculation rate or amount of spawn added to the substrate, the faster the mycelium will grow through the substrate. The substrate likely will not produce a larger amount of mushrooms, so a high inoculation rate means more money spent on spawn per pound of mushrooms.

Can you speed up mycelium spreading? ›

Mycelium growth can be sped up by optimizing certain conditions. Here are some key factors: 1. Temperature: The optimal temperature for mycelium growth is usually between 24-27°C.

How do you activate spores? ›

Heat activation of bacterial spores can be imitated by suspending spores in reducing agents. Reversi- ble activation of B. cereus T spores has been induced by mercaptoethanol and thioglycolate (26).

What do glittering spores do? ›

Unlike Mushroom Spores, Glittering Spores allow five uses. If sprinkled on dropped items like Rupees or Hearts, they can upgrade them to more valuable Rupees or Fairies. If sprinkled on enemies, most of them will become stunned.

What do you do with a spore print? ›

The spores will have fallen from the cap and you should see a print on the paper, which replicates the gill pattern from the mushroom. This is the spore print which can then be used to grow your own mushrooms. Keep the print in a sealed bag in a cool, dry, dark place until you are ready to cultivate.

How long do you leave a spore print? ›

Cover the mushroom with a bowl (to stop it drying out and to reduce air currents that might spoil your print by blowing the tiny spores around). 3. Leave everything where it is for at least 2 hours or longer (overnight).

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Terence Hammes MD

Last Updated:

Views: 6480

Rating: 4.9 / 5 (49 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Terence Hammes MD

Birthday: 1992-04-11

Address: Suite 408 9446 Mercy Mews, West Roxie, CT 04904

Phone: +50312511349175

Job: Product Consulting Liaison

Hobby: Jogging, Motor sports, Nordic skating, Jigsaw puzzles, Bird watching, Nordic skating, Sculpting

Introduction: My name is Terence Hammes MD, I am a inexpensive, energetic, jolly, faithful, cheerful, proud, rich person who loves writing and wants to share my knowledge and understanding with you.